ISG 2200 The starter model in the class of inductive shrinking units. The mobile shrink unit ISG2200 represents an inexpensive initial move into inductive shrinking technology. The low weight means that it can be used flexibly, wherever it is required. Despite the compact design, a new processor-controlled high-frequency generator and the optimized coil geometry allow tool change times of solid carbide tools from Ø 3 – 20 mm and HSS tools from Ø 6 – 20 mm in a few seconds. Due to the use of predetermined parameters, the overheating of chucks is not possible when handled correctly. After the heating operation the coil returns to the start position automatically. The integrated fan cools down the heated clamping chucks quickly.
	ISG 3200 The performance class for continual tool changing. ISG3200 is a universal shrink unit for the professional use of shrinking technology. With its unique coil changing system, the power transfer is optimally adjusted to the different clamping chucks. Compared to other systems, this makes it possible to clamp the smallest diameters Ø 6-50 mm (1/4”–2”) with high speed tools as well as down to Ø 3 mm (1/8”) with solid carbide tools. With a range of special coils, the unit can be suited to other special tools. Four integrated fans make it possible to cool down the clamping chucks even in a short time. The fans are activated automatically by a light barrier as soon as the chuck is pushed into the cooling position. This means that constant preparation of a high number of tools can be guaranteed.
	ISG 2200 WK The all-in-one solution for tool changing in record times. The ISG2200WK combines shrinking technology with water cooling. With the new all-in one solution the shrinking and cooling cycle is done in one position. Despite the compact design, a new processor-controlled high-frequency generator and the optimized coil geometry allow tool change times of carbide tools from Ø 3 – 20 mm and HSS tools from Ø 6 – 20 mm in a few seconds.
	ISG 3200 WK The universal all-in-one solution for tool changing in record times. The ISG3200WK combines shrinking technology with water cooling. With the new all-in one solution the shrinking and cooling cycle is done in one position. By the automated process the heated shrink chuck is moved down in the cooling position with a pneumatic cylinder after the heating time. In the cooling position the chuck is flooded directly with emulsion. After the set water cooling time the chuck moves upwards. During the movement the air is blowing drying the chuck. This completely new kind of cooling achieves a record tool change time. Contact with the heated chucks is not possible and so there is no danger of burns.
	ISG 1000 The cost-effective, compact starter shrink unit. Read - Steady - Shrink. The alternative unit for new starters, for those who rarely shrink and for the small budget, ISG1000 is designed for easiest and quick handling. It is suitable for all major tool spindles with a maximum tool length of 290 mm from taper gauge line.
	MS502 MS502 Micro Shrink Unit. Small but mighty. The MS502 is a low consumption Micro shrink unit specifically for special small sized chucks and perfectly complements the Bilz range of shrink units. It combines the quality and speed of Bilz shrinking technology in a slim design and is an economical alternative for individual shrinking requirements.
	Accessories TSF – Interchangeable discs. Induction coil. Ejection device for broken tools.